Voodoo Lab Pedal Power 2 Plus: An Overview

The Voodoo Lab Pedal Power 2 Plus stands out as a top-tier power supply specifically designed for guitar effects pedals. It provides clean, isolated power, ensuring optimal performance for your pedalboard. This eliminates unwanted noise and ground loops.

Key Features of the Pedal Power 2 Plus

The Pedal Power 2 Plus offers eight isolated 9V outputs, each short-circuit protected and regulated for consistent power. It includes high current outputs to accommodate power-hungry pedals, and variable voltage outputs to simulate battery sag, expanding tonal possibilities.

Isolated Outputs

The isolated outputs of the Voodoo Lab Pedal Power 2 Plus are a key feature that distinguishes it from other power supplies. Each of the eight 9V outputs is completely isolated from the others, meaning they operate independently. This isolation is crucial for eliminating ground loops, which can cause unwanted noise and hum in your signal chain. By preventing these ground loops, the Pedal Power 2 Plus ensures a clean and quiet signal, allowing your pedals to perform at their best.

Furthermore, the isolation protects your pedals from voltage spikes and surges, preventing damage and ensuring consistent performance. Each output is also short-circuit protected, meaning that if one output experiences a fault, it will not affect the other outputs. This adds another layer of protection for your valuable pedals. The isolated design also allows you to use different types of pedals with varying power requirements without causing interference or compatibility issues. This provides flexibility in your pedalboard setup.

Variable Voltage Outputs

The Voodoo Lab Pedal Power 2 Plus includes two variable voltage outputs, adding a unique dimension to your pedal powering options. These outputs, typically outputs 5 and 6, allow you to simulate the effect of a dying battery on your pedals. By adjusting the voltage, you can create a “sag” effect, which can add warmth, compression, or even fuzz to your tone. This is particularly useful for vintage-style pedals that respond differently to lower voltages.

The variable voltage feature also allows you to experiment with different tonal characteristics of your pedals. Some pedals may sound more aggressive or mellow at different voltages, giving you more control over your sound. The adjustable voltage range typically goes from 4V to 9V, providing a wide range of tonal possibilities. It is important to note that you should always consult your pedal’s manual to ensure that it can safely operate at lower voltages. This feature enhances the versatility.

High Current Outputs

The Voodoo Lab Pedal Power 2 Plus incorporates dedicated high-current outputs, designed to accommodate power-hungry effects pedals that demand more amperage than standard pedals. These outputs are crucial for modern digital effects, such as those from Boss Twin pedals, Line 6 modelers, and TC Electronic Nova pedals, ensuring they receive sufficient power for optimal performance. Without adequate current, these pedals may exhibit issues like diminished sound quality, malfunction, or even fail to operate altogether.

The Pedal Power 2 Plus’s high-current outputs deliver the necessary amperage to power these pedals reliably, preventing any performance-related problems. This ensures that your digital effects operate at their full potential, providing the sound quality and functionality they were designed to deliver. By utilizing the high-current outputs, you can confidently integrate power-demanding pedals into your setup, knowing that they will receive the necessary power for stable and consistent operation enhancing the quality.

Powering Different Pedal Types

The Voodoo Lab Pedal Power 2 Plus offers versatile power options, supporting various pedal types. It efficiently powers Line 6 modelers, Boss Twin pedals, and even 18V or 24V pedals with an optional voltage doubler cable ensuring compatibility.

Line 6 Modelers

The Voodoo Lab Pedal Power 2 Plus is designed to provide adequate power to Line 6 modeling pedals. These pedals often require higher current than standard analog pedals, and the Pedal Power 2 Plus is equipped to handle these demands efficiently. Newer models of the pedal can also power Line 6 modeling pedals.

By using the appropriate outputs on the Pedal Power 2 Plus, you can ensure that your Line 6 modelers receive the correct voltage and current, preventing any performance issues or damage to the pedal. The isolated outputs also minimize noise, resulting in a cleaner and more professional sound.

The Pedal Power 2 Plus ensures these pedals function correctly by delivering consistent and reliable power. This feature is essential for guitarists using Line 6 modelers on their pedalboards, providing a stable and noise-free power source. This allows the user to get a cleaner sound from their pedal.

Boss Twin Pedals

The Voodoo Lab Pedal Power 2 Plus is fully capable of powering Boss Twin pedals. These pedals often require higher current compared to standard compact pedals. The Pedal Power 2 Plus includes specific outputs designed to accommodate these higher current demands, ensuring that your Boss Twin pedals operate correctly and reliably.

By connecting your Boss Twin pedals to the appropriate high-current outputs on the Pedal Power 2 Plus, you can avoid common issues such as noise, voltage drops, and inconsistent performance. These outputs provide a stable and clean power supply, allowing the pedals to function as intended. This ensures that the tones and effects of your Boss Twin pedals are accurately reproduced.

The Pedal Power 2 Plus provides a reliable and noise-free power source for these pedals, allowing guitarists to use them with confidence. This feature makes the Pedal Power 2 Plus an ideal choice for guitarists who rely on Boss Twin pedals in their setups.

18V and 24V Pedals

While the Voodoo Lab Pedal Power 2 Plus primarily provides 9V outputs, it can also accommodate 18V and 24V pedals with the use of an optional voltage doubler cable. This cable combines the output of two 9V outputs to deliver the necessary higher voltage. This allows you to power a wider range of pedals.

To power an 18V pedal, you would connect two 9V outputs from the Pedal Power 2 Plus to the voltage doubler cable. Then, connect the cable to your 18V pedal. For 24V pedals, a similar process is followed, ensuring compatibility with pedals requiring higher voltage.

It is crucial to consult the user manual for your specific 18V or 24V pedal to verify its power requirements and ensure compatibility with the voltage doubler method. This ensures that the pedals operate correctly and reliably. This prevents any damage.

Using the Manual

The Voodoo Lab Pedal Power 2 Plus comes with a comprehensive user manual. This document provides essential information for understanding and utilizing the power supply effectively. It is highly recommended to read the entire manual before operating the Pedal Power 2 Plus. This will prevent damage to your effects pedals due to improper usage.

The manual covers various aspects of the power supply. This includes its features, connections, and operating instructions. It also provides troubleshooting tips and detailed specifications. Specific sections address powering different types of pedals. This includes Line 6 modelers, Boss Twin pedals, and 18V/24V pedals.

By consulting the manual, users can ensure they are properly connecting and powering their pedals. This helps to avoid potential issues and maximize the performance of their pedalboard. The manual serves as a valuable resource for both new and experienced users. This makes it an essential component of the Pedal Power 2 Plus package.

Troubleshooting and Specifications

When issues arise with the Voodoo Lab Pedal Power 2 Plus, consulting the troubleshooting section of the manual is crucial. This section addresses common problems, such as pedals not receiving power or experiencing excessive noise. The manual offers potential solutions, including checking connections, verifying voltage settings, and ensuring proper grounding.

The specifications section provides detailed technical information. This includes the input voltage requirements, output voltage and current capabilities, and isolation characteristics. This information is essential for ensuring compatibility with your pedals. It also allows you to optimize the power supply’s performance.

Understanding the specifications helps prevent overloading the outputs. This could potentially damage the power supply or connected pedals. By carefully reviewing the troubleshooting and specifications sections, users can effectively diagnose and resolve issues. This ensures the Pedal Power 2 Plus operates reliably and delivers optimal performance for their pedalboard.